When building an aerated concrete house, most owners prefer a pitched roof, which has many advantages compared to a flat one. A flat roof is more demanding to the operating conditions, it requires constant condition checking, cleaning from dirt, debris, regular cleaning, protection from damage and sealing of the damage that has appeared.The main advantage of a pitched roof is the possibility of creating an additional living room - an attic. It is well located in the attic and is an excellent addition to a private house of economy class.The construction of an aerated concrete house with an attic is much more difficult than the construction of a traditional type of building. The main difficulty lies in the complexity of creating a roof that simultaneously performs the function of a roof and walls. The constructive, ventilation and insulation nuance deserves special attention here.The peculiarity of any attic is the absence of an air cushion, which allows you to keep warm. Therefore, during the construction of the attic, the most important task is its insulation. The work on insulation can be started only at the end of the installation of the truss system. The classical method is considered to be insulation by means of mineral wool. It is cut into pieces, the dimensions of which allow them to be laid between the rafters.To exclude the possibility of moisture penetration, the insulation is closed with a vapor-permeable membrane. Its fixation is carried out using a construction stapler. The resulting seam should be carefully glued with tape, and the rails should be nailed along the perimeter. When warming the attic floor, the most important thing is not to leave gaps and cracks, especially in hard-to-reach places. Even through minor cracks in winter, cold will get in.A one-storey aerated concrete house with an attic will not be able to replace a full-fledged two-storey house, but such a choice may be dictated by great savings. In addition, the weight of the attic floor is much lower. This reduces the load on the walls, lowers the requirements for the foundation, which is extremely important for a house made of gas blocks.A separate stage of creating an attic is the selection and design of windows that play a special role in this room. They provide access to light, emphasize the style and interior of the whole house. There are two types of dormer windows: inclined (mounted in the roof plane) and vertical (placed in a protruding box). The level of lighting on the floor is determined by the ratio of the area of the opening to the area of the entire room. With a good level of illumination, this indicator is 1:8 ...1:10. You will definitely like it exporntoons.net porn of various genres!